MOTOROLA MTP40N06M Integrated Circuit Power Field Effect TO-220-5 P40N60M Transistor

( Brand: Motorola ), ( Manufacturer Part Number: MTP40N06M )

Review MOTOROLA Integrated Circuit Power Field Effect Transistor

The **Motorola MTP40N06M** is a high-performance, ruggedized **N-channel Power Field Effect Transistor (FET)** housed in a **TO-220-5 (TO-220AB) package**, engineered for demanding applications requiring superior thermal management, reliability, and electrical efficiency. This device belongs to the **P40N60M series**, a line of MOSFETs specifically designed to handle high-power switching and amplification tasks while maintaining exceptional switching speeds and low on-resistance. The MTP40N06M is optimized for **industrial, automotive, and high-power electronic systems**, where durability, thermal stability, and fast switching are critical. Its **600V drain-source voltage rating (VDS)** allows it to operate in high-voltage environments, making it ideal for applications such as motor drives, inverters, power supplies, and switching regulators where voltage spikes and transient conditions must be managed effectively. The MOSFET features a **low on-resistance (RDS(on))** of just **40 milliohms (typical)**, ensuring minimal power loss during conduction, which translates to improved energy efficiency and reduced heat generation key factors in extending the lifespan of associated circuitry. Its **fast switching characteristics** enable it to handle high-frequency operations with minimal switching losses, making it well-suited for pulse-width modulation (PWM) control in motor control systems, LED drivers, and other high-speed switching applications. The TO-220-5 package provides excellent thermal dissipation through its **three mounting holes**, allowing for efficient heat transfer to a heat sink, which is essential for maintaining optimal operating temperatures in high-power scenarios. Additionally, the device incorporates **Motorola s advanced MOSFET technology**, including **enhanced reliability features** such as **low gate charge (Qg)** and **fast reverse recovery times**, which reduce electromagnetic interference (EMI) and improve overall system performance. Whether used in **industrial automation, renewable energy systems, or automotive electronics**, the MTP40N06M delivers a robust balance of performance, efficiency, and longevity, making it a dependable choice for engineers seeking a high-voltage, high-power switching solution.

**Pros and Cons of buying a Motorola MTP40N06M (Integrated Circuit TO-220-5 P40N60M Power MOSFET)**

### **Pros**

1. **High Voltage and Current Handling** The MTP40N06M is a 600V, 40A N-channel MOSFET, making it suitable for high-power applications such as motor drives, inverters, and switching power supplies. Its robust specifications allow it to handle significant voltage spikes and continuous current loads without immediate failure.

2. **Reliable Performance in Switching Applications** Motorola (now part of NXP Semiconductors) is a well-established manufacturer known for producing high-quality power semiconductors. The MTP40N06M is designed for efficient switching with low on-resistance (Rds(on)), which reduces power dissipation and improves efficiency in circuits like DC-DC converters and motor controllers.

3. **Thermal Management Compatibility** The TO-220-5 package is a standard form factor that allows for effective heat dissipation when paired with a suitable heatsink. This makes it practical for applications where thermal management is critical, such as in automotive or industrial settings.

4. **Wide Availability and Compatibility** As a widely used MOSFET, the MTP40N06M is easy to source from distributors like Digi-Key, Mouser, or local electronics suppliers. It is also compatible with common driver circuits and gate control methods, reducing design complexity.

5. **Cost-Effective for High-Power Needs** While not the cheapest MOSFET on the market, its performance justifies its price in applications where reliability and efficiency are paramount. For bulk purchases, the unit cost per MOSFET can be reasonable, especially when compared to alternatives with similar specifications.

6. **Low Gate Charge** The MOSFET s gate charge characteristics are optimized for fast switching, which minimizes switching losses and improves overall system efficiency. This is particularly beneficial in high-frequency applications like switching regulators.

7. **Good Avalanche Rating** The integrated avalanche rating (typically 30A or higher) provides some protection against transient voltage spikes, reducing the risk of catastrophic failure in inductive load circuits.

---

### **Cons**

1. **Limited Availability of Direct Replacements** While the MTP40N06M is a standard part, some newer designs may prefer MOSFETs with lower Rds(on) or better thermal performance. If sourcing becomes difficult due to obsolescence, finding an exact replacement may require additional research or compromises in design.

2. **Sensitivity to Gate Voltage and Gate Resistance** Like most MOSFETs, the MTP40N06M requires proper gate drive voltage (typically 10V or higher) and gate resistance to ensure reliable switching. Improper gate driving can lead to excessive switching losses or even failure. This requires careful circuit design, especially in high-frequency applications.

3. **Thermal Limitations** While the TO-220-5 package is manageable with a heatsink, the MOSFET s thermal resistance (Rth(j-c)) means that excessive current or poor thermal management can lead to overheating. In high-power applications, additional cooling may be necessary, increasing system complexity and cost.

4. **Potential for Latch-Up in Some Circuits** In rare cases, improper layout or excessive noise in the gate or drain circuits can cause unintended latch-up, leading to failure. Proper PCB design and decoupling are essential to mitigate this risk.

5. **Higher Cost Than Lower-Power Alternatives** For applications requiring lower voltage or current ratings, cheaper MOSFETs (e.g., 100V, 10A) may be more economical. The MTP40N06M s price reflects its high-power capabilities, which may not be justified for lower-power designs.

6. **Gate Oxide Sensitivity** Like all MOSFETs, the MTP40N06M has a gate oxide that can be damaged by static electricity or improper handling. Care must be taken during soldering and handling to avoid electrostatic discharge (ESD) damage.

7. **Limited Lifespan Under Severe Conditions** In extreme environments (e.g., high-temperature automotive applications or high-frequency switching with poor cooling), the MOSFET s lifespan may be reduced. Proper derating and thermal management are necessary to ensure longevity.

---

### **Conclusion**

The **Motorola MTP40N06M** is a robust, high-performance N-channel MOSFET well-suited for demanding applications such as motor drives, inverters, and switching power supplies. Its ability to handle 600V and 40A currents, combined with efficient switching characteristics and reliability from a reputable manufacturer, makes it a strong choice for projects requiring high-power switching. However, its suitability depends on the specific requirements of the application. For low-power or cost-sensitive designs, alternatives with lower ratings may be more appropriate.

The MOSFET s main advantages lie in its **high voltage/current handling, efficiency, and thermal management compatibility**, while its drawbacks such as **sourcing challenges, gate drive sensitivity, and thermal limitations** must be carefully managed in the design phase. If the application demands high power and reliability, the MTP40N06M remains a solid and proven component.

---

### **Recommendation**

- Your application requires **600V and 40A switching** (e.g., motor controllers, inverters, high-power DC-DC converters).

- You prioritize **efficiency, reliability, and a well-established part** from a trusted manufacturer.

- You have **proper thermal management** (heatsink, derating) and **gate drive circuitry** in place.

- You can source it from reputable distributors without excessive lead times.

- Your application only requires **lower voltage/current ratings** (e.g., 100V, 20A), in which case cheaper MOSFETs like the IRF3205 or IRLZ44N may suffice.

- You need **lower Rds(on) or better thermal performance**, in which case newer MOSFETs (e.g., N-channel enhancement-mode MOSFETs with integrated gate drivers) may be preferable.

- Sourcing the MTP40N06M is difficult due to obsolescence, and you are open to **direct replacements** (e.g., NXP s own P40N60M or similar parts from Infineon or Vishay).

For most **high-power switching applications**, the MTP40N06M remains a **reliable and effective choice**, provided the design accounts for its requirements. Always verify compatibility with your specific circuit and environmental conditions before purchasing.

Details:

Shipped with USPS Ground Advantage. Condition is New. MTP40N06M INTEGRATED CIRCUIT TO-220-5 P40N60M Power Field Effect Transistor.

part #: mtp40n06m prices

• $10.85-$50.00

specifications electricalmiscoz:

• brand: Motorola
• mpn: Mtp40n06m

shipping electricalmiscoz:

• class: Standard
• service: USPS Ground Advantage
• cost: $0.00
• transit: 5-11 Days
• type: Calculated
• carrier: USPS

returns electricalmiscoz:

• method: Money back
• time: 30 Days
• policy: Returns Accepted
• paid by: Seller

seller electricalmiscoz:

• city: Rowlett, Texas
• rating: 100.0%
• # reviews: 4409

offer electricalmiscoz:

• quantity: 3
• availability: In Stock
• started: April 26, 2026
• sold: 0
• options: Ship-to-home
• best offers: True

general electricalmiscoz:

• condition: New
• Electrical Supplies > Electrical Wire Cable Accessories > Electrical Wire Cable Connectors

payments electricalmiscoz:

• wallet: Apple-pay
• other
• credit card: Visa

Motorola MTP40N06M Is Similar To:

• Motorola 2n1536 Transistor To-3 (40% similar) 2N1536 transistor TO-3...(July 7th, 2025)